Sceptre Power Sdn Bhd
No. 49, Jalan TS 6/5,
Taman Industri Subang,
47510 Subang Jaya,
Selangor, Malaysia.
No. 49, Jalan TS 6/5,
Taman Industri Subang,
47510 Subang Jaya,
Selangor, Malaysia.
+603-8011 6618
Active Leak Repair Kit™ (ALRK™)
Previous | 1 / 5 | Next |
Description
Active Leak Repair Kit™ is an easy-to-install compression seal system designed for active leaks up to 75 psi. It consists of a compression strap – suitable for operations handling water, harsh chemicals and high heat – combined with a resin fiberglass outer wrap that hardens around it, securing the strap in place and protecting it from mechanical damage.
Installation
Active Leak Repair Kit™ is an easy-to-install compression seal system designed for active leaks up to 75 psi. It consists of a compression strap – suitable for operations handling water, harsh chemicals and high heat – combined with a resin fiberglass outer wrap that hardens around it, securing the strap in place and protecting it from mechanical damage.
Installation
1. Secure the leak with QuickStrap™ Starting opposite the leak, apply QuickStrap™ tightly around the pipe, layer over layer. Then, secure the end with tape. |
|
2. Prepare the Pipe Surface Mark and abrade the surface to provide an anchor pattern. Solvent wipe the surface and allow the solvent to flash off. |
|
3. Apply Pipe Wrap® and Topcoat Remove Pipe Wrap® from the foil pouch and immerse in water to activate the resin. Apply provided Pipe Wrap® using the cigar wrap method. A topcoat may be applied after two hours. |