Sceptre Power Sdn Bhd
No. 49, Jalan TS 6/5,
Taman Industri Subang,
47510 Subang Jaya,
Selangor, Malaysia.
No. 49, Jalan TS 6/5,
Taman Industri Subang,
47510 Subang Jaya,
Selangor, Malaysia.
+603-8011 6618
ON-LINE Acoustic Emission Inspection

SENTRO TECHNOLOGIES USA, LLC specializes in Acoustic Emission Inspection and Testing, which can be performed ON-LINE during normal operating conditions.
Acoustic Emission (AE) is a phenomenon of sound and ultrasound wave radiation in materials that undergo deformation or fracture processes.
Cracking, plastic deformation development, fracture and de-bonding of hard inclusions are examples of macroscopic sources of AE in metals.
Friction and impacts are examples of mechanical AE sources.
Detection of corrosion products by AE method

Applicable for:
- Piping – metal, concrete, plastics – all sizes, above ground or under ground
- Heat exchangers
- Storage tanks, including hazardous material
- Pressure vessels, including towers and reactors
- Isolated equipment
- FRP (Fiberglass) equipment (vessels, pipes)
- Glass lined equipment
Absolute identification of flaws and defects – size and location:
- Corrosion
- Micro-cracks
- Holes
- Blockages
- Deformation
Detection of micro-cracks by AE method

Our AE testing method is approved by:
- ASTM – American Society for Testing and Materials
- ASME – American Society of Mechanical Engineers
- European Committee for Standardization
- International Organization for Standardization
- Japanese Institute for Standardization
- Japanese Society for Nondestructive Inspection
Example of AE signals
.jpg)
ON-LINE AE Testing of a storage tank
Results – corrosion rate of storage tank bottom plates

AE Inspection of underground pipeline
.jpg)
AE Inspection of above-ground pipeline

AE Inspection of FRP pipeline
SENTRO AE high frequency sensors and amplifier

AE Inspection of a Reactor, total of 36 sensors installed

SENTRO AE Engineers in action